Personal tools
You are here: Home / Products / Log rounding machines

Woodlandia Log Rounders

Woodlandia machines used for manufacturing of round dowels, posts and poles

 

Woodlandia Machines of LR series
 

Woodlandia offers line of machines for log rounding purposes. The line includes machines for the processing of small diameter logs from 2¾” (70mm) up to 17¼” (440mm) in butt diameter.
For processing of small logs Woodlandia recommends LR-160S (former RLM-160S), LR-160 (former RLM-160), LR-100 (former RLM-100). For larger logs the LR-200 and LR-320 are more suitable.
These log through-pass machines with the rotary type milling head produce round dowels from raw barked logs in one pass. RLM-160S machine can also perform rip-sawing operation on dowels.
Throughput of the machine varies depending on the model. Please refer to the specification below for actual numbers.

 

Pictures

 

            

 

SPECIFICATION of Log Rounding Machines of LR series

 

 

LR-40

LR-60

LR-80

LR-160

LR-160S

LR-240|

LR-320

Output dowel range:

¾” – 1½”

18 -x 40 mm

¾” – 2⅜”

18 - 60 mm

1¾” – 3⅛”

38 - 80 mm

2½” - 6¼”

60 - 160 mm

2½” - 6¼”

60 - 160 mm

4¾”(3⅜”) - 8”
120(85)-240mm
by special order:
3⅜” - 8”
85 - 240 mm

6¼ – 12½”

160 - 320 mm

Input raw log (stem) range:

Only works with small planks:

2x2” (50x50mm )

2¾” – 4”

70 x100 mm

or planks up to:
2¾x2¾” (70x70mm)

3¼” – 4¾”

85 x 120 mm

or planks up to:
4¾ x4¾ ” (85x85mm)

Min tip - Max butt:

 

3¼” – 9½”

85 – 240 mm

Min tip - Max butt:

 

3¼” – 9½”

85 – 240 mm

Min tip - Max butt:

5½” – 12½”
140 – 320mm

by special order:

4" – 12½”
100 – 320 mm

Min tip - Max butt:

 

7” - 17¼”

180 – 440 mm

Min length of the input log:

28” (0.7 m)

40” (1 m)

40” (1 m)

63” (1.6 m)

63” (1.6 m)

6½ ft (2m)

6½ ft (2m)

 

Feeding speed:

19½; 29½; 39 ft/min ( 6; 9; 12 m/min )

10-26 ft/min

3-8 m/min

8-26 ft/min

2.5-8 m/min

3-26 ft/min

1-8 m/min

Power of the milling motor(s)

4 HP (3 KW)

7.4 HP (5.5 KW)

14.75 HP (11 KW)

Rounding: 30 HP
22KW

Milling:

Rounding:

30 HP (22 KW)

Profiling + Ripping:

2*15 HP+15 HP

2*7.5 KW+11 KW

 

50HP

37 KW

 

 

74 HP

55KW

 

Power of feeding motor(s)

0.74 HP (0.55 KW)

1.47 HP (1.1 KW)

2 x 2 HP
2 x 1.5 KW

2 x 2 HP
2 x 1.5 KW

2*2 HP

2*2 KW

2*2 HP

2*2 KW

Cross cut (milling) saw capability

N/A

N/A

N/A

N/A

Yes

See RLM-240

See RLM-320

Milling cutter head frequency

5000 rpm

4000 rpm

3000 rpm

Rounding: 1600rpm
Milling: 2925 rpm

Rounding: 1600 rpm
Milling: 2925 rpm

Ripping: 2200 rpm

 

1000 rpm

 

900 rpm

Dimensions
(L x W x H)

44 x 48 x 44”

1.1 x 1.2 x 1.1 m

67 x 48 x 44”

1.7 x 1.2 x 1.1 m

71 x 79 x 52”

1.8 x 1.3 x 1.4 m

130 x 79 x 81”
3.3 x 2 x 2.05 m

130 x 79 x 81”
3.3 x 2 x 2.05 m

16 x 6½ x 6¼ ft
5 x 2 x 1.9 m

34 x 8 x 5 ft
10.35 x 2.5 x 1.5 m

Weight

992 lb (450kg)

1653 lb (750kg)

1874 lb (850kg)

5512 lb (2500kg)

5732 lb (2600kg)

8150 lb (3700kg)

12125 lb (5500 kg)




It is important to know in beforehand the following facts about this machine:

  • By default the machines are made for European 3-phase 380V/50Hz power 
  • Smaller machines can be supplied with optional phase converter to turn single phase into 3 phase
  • All parts are metric
  • Proper automated waste removal system is critical as bad waste management can drastically affect productivity
  • Log sorting is necessary for better productivity
  • For max productivity automatical in-feed and out-feed log decks as well as in-feed and out-feed conveyors are recommended
  • Speed of automated in-feed conveyor is to be adjustable to synchronize with in-feed speed of LR-machine.
  • LR machine' rotary head can remove up to 5cm (2") on radius or 10 cm (4") on diameter of the log. It means that butt diameter of input raw log must be not more than 4 inches than its top diameter. For example if output product (dowel) diameter is to be = 3½" and top dia of raw log is 4" than max diameter of log butt is to do not exceed 3½" + 4" = 7½"



Terms

  • Payment terms (USD, CAD, EURO): 50% upfront, remaining to be paid before delivery by instalments 

  • Delivery requires either one 40 ft or 20ft sea container (depending on a machine model). For delivery quotation contact us (postal or ZIP code of a destination is required)

  • All LTPS-machines are built by special orders only (usually no inventory, but some popular models can be in stock)

  • Please allow 60-150 days for manufacturing and delivery

  • Limited warranty (parts only) covering bearings, electrical components, motors is provided..USA & Canada: 1 year, world-wide; 6 months.

  • By special order NEMA-compatible motors can be installed on LTPS-machines (by default all LTPS-machines electrical parts are for European 3phase 380V, 50Hz power)

  • CSA/ULC/CE certification is optional 

  • Please inquire for our price lists and extra technical info

 

Please,  if interested